| |
 |
|
Prestige 316
Broadband Sharing
Gateway with Wirless Lan
|
 |
The
Prestige 316, a dual Ethernet router with broadband access sharing
capability, adopts one 10Mbps Ethernet as a WAN port for connecting to
broadband DSL or Cable modem for Internet access. |
|
Wireless
Product List
|
|
|
|
|
|
|
|
Prestige
316
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| In
addition, the Prestige 316 also equips one 10/100Mbps auto-sensing Fast
Ethernet for wired local area network and a built-in 11Mbps IEEE 802.11b-compliant
wireless access point for wireless LAN connectivity. With the wireless LAN
capability and ZyAIR's wireless solution, users can access the network at
the same time and work anytime and anywhere at home or in the classroom
and office, enjoying the convenience and mobility that wireless solutions
provide. Through the user-friendly Web-based configurator, users can easily
install and configure the Prestige 316 within a couple of minutes. Along
with the advent of the E-info era, the Prestige 316 has become the Internet
access tool necessary for today's SOHO users. |
|
| Features |
Wireless
Access Point
|
- Built-in 11Mbps
wireless Access Point
- IEEE 802.11b standard
compliance
- Direct Sequence
Spread Spectrum (DSSS) operating at an unlicensed 2.4GHz ISM band
- 11Mbps, 5.5Mbps,
2Mbps, 1Mbps data rate and auto-fallback support
- Wired Equivalent
Privacy (WEP) data encryption
- Seamless roaming
within IEEE802.11b wireless LAN infrastructure
- Diagnostic, Statistics
and Traffic Monitor
|
Broadband
Sharing Gateway
|
- Broadband access
sharing via cable/DSL modem
- IP routing protocol
- RIP-1 and RIP-2
- NAT/SUA
- DHCP client and
server
- PPP over Ethernet
and PPTP Client support
- RoadRunner Manager
for cable service connection
- IP Multicast
- IP Alias
- Dynamic Domain
Name Server (DDNS)
|
Network
Management
|
- Embedded Web-based
configurator
- Telnet and local
console management
- Built-in Command
Line Interpreter (CLI)
- SNMP
- Syslog support
for connection logs recording
- FTP/TFTP firmware
upgrade and configuration backup/restore
|
| Specfications
|
- Power Switch: ON/OFF
- Power Input: 12VDC
- Reset
- LAN: 10/100Mbps
Auto-sensing Ethernet
- WAN: 10Mbps Ethernet
- Console Port: DB9
RS-232 connector
- Wireless AP: PCMCIA
Card Bus, Built-in Antenna
*
Specification is subject to change without notice |
|
