Dispensing Bottles by Plato & Menda

Dispensing Bottles
By Plato & Menda

SOLVENT DISPENSERS
Press the cap down and fluids are pumped up into the dish. Air-tight check valve prevents evaporation, spillage or solvent flash fires. Also prevents fluid from dripping back inside and contaminating contents. Stainless steel pumps and caps.

Part No. SD4, 4 oz. plastic bottle
Part No. SD6, 6 oz. plastic bottle
Part No. SD8, 8 oz. plastic bottle

FLUX/LIQUID DISPENSERS
These leak proof flux/liquid dispensers are inexpensive. Dispenses a wide variety of liquids without dripping, spilling or waste. Bottles are 2 oz. polyethylene and have a 1” disposable stainless steel blunt needle. A .010” or .020” I.D. needle is included in the standard polyethylene and the static dissipative versions.

Part No. FD-2, Standard dispenser, ID .020
Part No. FD-21, Standard dispenser, ID .010
Part No. SF-01, S/D dispenser, ID .010
Part No. SF-02, S/D dispenser, ID .020
Part No. DS-020, 10 pack replacement needles

BRUSH SCRUB BOTTLE
Handy 2 oz. polyethylene solvent dispensers include a scrub brush and make spot cleaning of printed circuit boards fast and easy. A medium stiff nylon bristle or either a soft or hard natural bristle is available. Natural bristle brushes come with a static dissipative jacketed dispenser and meets MIL-STD-2000.

Part No. SB-2N, Nylon brush bottle
Part No. SF-B2HS, Soft natural brush bottle
Part No. SF-B2HH, Hard natural brush bottle

ANGLED SPOUT LIQUID DISPENSERS
This 8 oz. bottle is available in the standard polyethylene plastic or covered with static dissipative materials for ESD protection.

Part No. BC-250, 8 oz. standard bottle
Part No. SF-250, 8 oz. bottle - ESD safe

ESD SAFE LIQUID DISPENSERS
These bottles come standard in 4, 8, or 16 oz. sizes. Come covered in static dissipative materials for ESD protection.

Part No. SF-401, 4 oz. bottle with spout
Part No. SF-801, 8 oz. bottle with spout
Part No. SF-1601, 16 oz. bottle with spout

ESD SAFE SOLVENT DISPENSER SLEEVES
Protects against static discharge in the work area. Made from permanently static dissipative material, these sleeves fit 4, 6, or 8 oz. solvent dispensers. Dispensers not included.

Part No. SF-4, 4 oz. dispenser sleeve
Part No. SF-8, 8 oz. dispenser sleeve
Part No. SF-16, 16 oz. dispenser sleeve

FLUX BOTTLE WITH BRUSH
Square glass bottle with brush attached to plastic cap for dispensing liquids.

Part No. 63030, 1/2 oz. flux bottle