 |
VACUUM
TWEEZER
The first completely portable, no vacuum-pump tweezer ever. Self
contained system weighs less than 1 ounce. Has a pocket-sized,
fountain pen clip for portability. Ideal for picking up small objects
that have a flat surface. Lifts up to 50 gm. Storage compartment in
rear for vacuum probes and cups. Comes with one straight and one
vacuum cup.
Part No. V8901 |
 |
ACCU-TEK SMD 10-SA
For placing and soldering 1mm wide monolithic chip capacitors. Grooved
tips. Anti-crush device, 4-3/4” long.
Part No. AV18.135
|
 |
ACCU-TEK
SMD 20-SA
Same usage as 10-SA but tips have a 45° angle and are w/o anti-crush
device, 4-3/4” long.
Part No. AV18.136
|
 |
ACCU-TEK
SMD 30-SA
For handling/positioning 3 lead SOT packages, monolithic chip
capacitors, etc., 4-3/4” long.
Part No. AV18.131
|
 |
ACCU-TEK
SMD 40-SA
For placing all SOT packages vertically.
Part No. AV18.141 |
 |
ACCU-TEK
SMD 50-SA
For handling/positioning 2 and 3 lead SOT packages at 45° angle,
4-3/4” long.
Part No. AV18.130
|
 |
ACCU-TEK
SMD 60-SA
For positioning 5mm monolithic chip capacitors at 60° angle. Grooved
tips, 4-3/4” long.
Part No. AV18.137
|
 |
ACCU-TEK
SMD 70-SA
Grooved tips at 30° angle for holding and positioning cylindrical
devices, 4-3/4” long.
Part No. AV18.140
|
 |
ACCU-TEK
SMD 80-SA
For positioning all SOT packages horizontally. Tip bases are flat and
2mm long, 4-3/4” long.
Part No. AV18.133
|
 |
ACCU-TEK
SMD 90-SA
For positioning all flat devices at 60° angle, 4-3/4” long.
Part No. AV18.134 |
 |
ACCU-TEK
SMD 100-SA
For placing monolithic chip capacitors w/ vertical grooved holding
tips. 4-3/4” long.
Part No. AV18.132
|
 |
ACCU-TEK
SMD 110-SA
For placing 5mm monolithic chip capacitors with
vertical grooved holding tips, 4-3/4” long.
Part No. AV18.139
|
 |
ACCU-TEK
SMD 130-SA
3mm long tips bent at 60° angle, one forked blade for lead entry,
strong hold for positioning and soldering, 4-3/4” long.
Part No. AV18.138 |
|
|
