| |
Part
No.
|
Description |
|
XCELITE
CUTTERS
This miniature line is lightweight with full-flush
or semi-flush cutting edges.
|
| |
MS54
|
4" OVAL HEAD GENERAL PURPOSE CUTTER
Handles
most cutting requirements. Oval head with 7/16"
cutting edges, increases cutting life. |
| |
MS54J
|
4"
OVAL HEAD GENERAL PURPOSE CUTTER
Flush
cutting diagonal cutter. |
| |
MS54-3J
|
4"
RELIEVED HEAD DIAGONAL CUTTING PLIERS
Designed
for flush cutting in areas with limited access. |
| |
MS54-5J
|
4"
SLIM LINE TAPERED HEAD CUTTER
Flush
cutting for areas with limited access. Relieved head.
|
| |
MS54-9J
|
4"
TAPERED HEAD FLUSH CUTTER
Narrow
tips provide increased clearance. |
| |
S42-4JS
|
4"
RELIEVED TAPERED HEAD DIAGONAL CUTTER
For flush cutting 22 AWG copper wire in limited access
areas. |
| |
S47-5JS
|
5"
TAPERED HEAD DIAGONAL CUTTER
For flush cutting 22 AWG copper wire in limited access
areas. |
| |
170M
|
5"
SHEAR CUTTER
Flush cut. Produces shear cuts, reducing fatigue by
50%. Low profile |
|
KLEIN
CUTTERS
Made in USA of quality workmanship.
|
| |
D209-4C
|
4"
MIDGET POINTED-NOSE DIAGONAL CUTTER
For working in confined areas. Specifically designed
for tip cutting. Semi-flush with coil spring. |
| |
D209-5C
|
5"
MIDGET POINTED-NOSE DIAGONAL CUTTER
For working in confined areas. Specifically designed
for tip cutting. Semi-flush with coil spring. |
| |
D288-8
|
8"
HIGH-LEVERAGE DIAGONAL CUTTER
Provides a 36% greater mechanical cutting advantage
than a non-leverage cutter. |
| |
D275-5
|
8"
MIDGET LIGHTWEIGHT DIAGONAL CUTTER
Shear wire up to 14 AWG with flush cutting action. |
| |
