Torque Control Screwdrivers & Controllers
By Hios
Cl series
CL-SERIES TOOLS
For critical assembly work, these workhorses are designed for torque repeatability. All CL tools are industrial type for long life, quiet and recommended for use in "office type" assembly operations. Can be converted to cleanroom, Class 100 tools at minimal cost. These tools are designed for vertical insertion of fasteners and torque ranges of 3 lbf-21 lbf. Fasteners size ranges from #00 to #8.
DRIVER PART NO. RPM @ 30VDC TORQUE FASTENERS SIZE
CL-3000 64109 1000 3-25 lbf - in 00-1
CL-4000 64110 1000 .05-4.5 lbf - in 0-3
CL-6000 64116 790 1.7-8.5 lbf - in 1-4
CL-6500 64121 910 1.2-14 lbf - in 1-6
CL-7000 64126 750 2.5-21 lbf - in 2-8
ALPHA SERIES DRIVERS
Provide considerably higher RPM ranges, than corresponding CL series tool, and slightly higher torque ranges. Torque accuracy is ±2.5%. Power cords detach at the driver. (Requires transformer/controller.) Approximate RPM @ 30 VDC is 1400.
DRIVER PART NO. TORQUE LBF - IN. BITS
A-4500 64112 3.5-6.5 4.0MM
A-4500 64113 3.5-6.5 1/4"HEX
A-6500 64124 4.5-16 1/4"HEX
Tool Balancer TOOL BALANCER
Completely retracts the tool, allowing operator to work interference-free. Handles tool weights up to 2 lbs. Cord length is 5 feet.

Part No. 64309
Tool Positioner
 TOOL POSITIONER
Tools remain at whatever level or position the operator leaves it when doing other tasks. Handles tool weights up to 5 lbs. Cord length is 55 inches.

Part No. 64313
CLT-50 TOOL STANDS AND HOLDERS OR ACCESSORIES
Simple and least expensive tool stands prevent tools from accidentally falling off a work bench. Use with either our tool positioner or balancer.

Part No. 64312, Ht 38", offset 10"
Part No. 64315, Ht 38", offset 18"
CLT-100 TRANSFORMERS/CONTROLLERS
All CL and Alpha Series tools require a transformer/circuit controller.
TRANSFORMER/CONTROLLER PART NO. RPM @ 30VDC
CLT-50 64163 20-30
CLT-100 64164 20-30
CLT-65 64185 20-30

Home | Specials | Components | ESD Products | Solder | Workbenches
Shelving | Production Tools | Line Card | Bertech History | Product Search