MINIATURE
SQUEEZE-EZE CUTTER/CRIMPER
Miniature actuator, for use with the cutting, crimping,
and bending. Made of durable aluminum, the tool is
small (5" long x 1-1/2" diameter) and lightweight
(8 oz.), and can be operated at air pressure of 60-80
psi. Part No. MSP-1
CUT
AND CRIMP TYPE
These jaws shear soft wire at a specified "rise’
distance above the working surface and flatten the
rise so it is mechanically secure before soldering.
Rise distances from 0.030 to 0.060 inch.
PART NO.
MAX. WIRE
RISE
ANGLE
LGTH. OF CUT
MCD-1
.030"/ .76mm
Semi-flush
15°
7/16" / .76 mm
MCD-11
.030"/ .76mm
Flush
15°
7/16" / .76 mm
SQUEEZE-EZE
POWER PACKS
The most powerful tool in the electronic group (575
lbs. force @ 80 psi). Made of durable aluminum, the
tool is small (5-1/2" long x 1-1/2" dia.).
lightweight (11 oz.) and can be operated at air pressure
of 60-100 psi. A built-in adjusting screw controls
the opening of the jaw sets, all of which are made
of AISI-S1 tool steel and finished in anti-glare black
oxide. All jaw sets are fully resharpenable. Part No. SP-01
Part No. SP-02,
same as SP-01, but delivers more power.
CUT
AND CRIMP JAWS
These jaws shear soft wire at a specified "rise’
distance above the working surface and flatten the
rise so it is mechanically secure before soldering.
Rise distances from 0.030 to 0.060 inch.
PART NO.
MAX. SOFT WIRE
RISE
ANGLE
LGTH. OF CUT
CC-1
.050"/ 1.27mm
.040" / 1.02 mm
45°
3/8" / 10 mm
MCC-1
.030"/ .76 mm
.030"/ .76 mm
45°
1/8" / 3 mm
MCC-2
.030"/ .76 mm
.030"/
.76 mm
90°
1/8" / 3 mm
DYKE-TYPE
All jaw sets are secured in the housing by a shouldered
pivot-screw with recessed hex head and can be reversed
to facilitate right- or left-handed use. Jaw sets
are removable for repeated resharpening.
