DESCRIPTION:
1
mil Electrical grade Polyimide with pre-cured
pressure sensitive silicone adhesive film is
designed to operate at elevated temperatures
higher than polyester. This heat-stabilized
film surpasses the dimensional stability of
polyester, and will thermoset to increase adhesion
values.
• Thin
and conformable enabling masking of uneven
surfaces
• Wide operating temperature range up to 500° F
• Removes cleanly without adhesive residue after exposure to heat
• High
performance silicone adhesive
• High
strength backing provides superior resistance
to puncture and tear
• Resistance to chemical attack
TYPICAL END USE:
• High
temperature masking
• Protection of circuit board gold finger contacts during wave solder
|
TECHNICAL
DATA
|
VALUE
|
| Color |
Amber |
| Adhesion
Type |
Silicone |
| Film
Thickness (mils) |
1.2mil |
| Adhesive
Thickness |
1.5mil |
| Total
Thickness (mils) |
2.7 |
| Adhesion
to Steel: lbs/inch |
3 |
| Tensile
Strength (lbs/inch) |
32 |
| Elongation:
% |
60 |
| Dielectric
Strength, volts |
7000 |
| UL-94
Flammability Rating |
V-0 |
| Insulation
Resistance, mega ohms |
1,000,000 |
| Electrolytic
Corrosion Factor |
1 |
| Insulation
Class, centigrade |
180°F |
| Temperature
Resistance |
250°C
(500°F) |
| Resistance
to: acids, oils, solvents |
EXCELLENT |
| Length |
36
yards |
| |
|
| All
tapes are on plastic core and individually shrink
wrapped |
