|
Liquid crystal back light
power-oriented connector
QZ-19 Series
-
QZ-19 series is a relay
connector (3-positions) for high pressure low back base
for liquid crystal display back light to cable, and cable
to cable.
-
Clad contact, applicable
for flexible high pressure power cable, is adopted for the
cable-side connector.
-
The height is lower than
booster transformer. (4 mm when connected)
-
A simple lock is provided
to prevent cable disconnection by shock when moved.
-
The connector is polarized
so it cannot be connected upside-down.
Specifications
Number of positions: 2, 3, 4, 5
Rated voltage: 600V AC (r.m.s)
Rated current: 1 A (AWG # 30), 2 A (AWG # 26, 28), 3A (AWG #
22, 24)
Withstanding voltage: 1000V AC (r.m.s) one minute
3000V AC (r.m.s) one minute
(to thin out terminals)
Contact resistance: Less than 40 m
(including cable of 50 mm)
Mobile phone connector
PX-12 Series
-
Combination connector: A
RF (Radio Frequency) connector developed as an interface
for portable/cellular telephone applications. The
combination connector has a coaxial contact, 2 positions
for battery/power, and 12 positions for signal lines.
-
RF contact is a high
frequency 50
coaxial connector with switch, providing impedance
matching for the characteristics of high frequency
attributes.
-
After termination to the
cable, the RF contact is easily inserted into the housing
assembly. The cable plug utilizes a simple squeeze to
release latching mechanism.
-
Signal contacts on the
cable plug are terminated to the cable using insulation
displacement contacts (IDC) for labor savings.
-
SMT contacts are utlilized
on the base side for lower profiles and higher density.
Specifications
| [Coaxial portion] |
|
[Signal portion] |
| Characteristic impedance: 50 |
|
Rated voltage: 125V AC (r.m.s), one
minute |
| Frequency: DC to 900 MHz |
|
Rated current: 1 A |
| V·S·W·R: Less than 1.5 |
|
Contact resistance: Less than |
|
