• Epson/S-MOS SED1330/1335  Not supplied with any Hantronix display but is a recommended controller for 128x160, 240x160, 240x192 and 320x240 graphics modules. (523k)
• Epson/S-MOS SED1520  This controller is supplied with our 122x32 graphics modules. (163k)
• Sanyo LC7981  This controller is supplied with our 128x32 graphics module.(387k)
• Toshiba T6963C  This popular controller is supplied with our 128x64, 240x64, 128x128, 160x128 and 240x128 graphics modules. (1,560k)
• Toshiba T7932  This controller is supplied with our 150x32 graphics module. (888k)
• Samsung KS0066  This controller is used in all of our character modules.
• Samsung KS108  This controller is supplied with our 128x48 and 128x64 graphics modules.(158k)

 Miscellaneous data sheets and generic LCD information

Character Modules:

• Part Number Breakdown for Character Modules. This explains the derivation of our part numbers and includes a list of the most popular option combinations. (10k)
• Display Character Position & Address. This is essentially a memory map of the physical character position vs. its address in the display RAM. Page #1 Includes displays from 8 x 1 to 24 x2. (17k) Page #2 includes displays from 24 x 4 to 40 x 4. (20k)
• Character Module Initialization. This specification details the software and hardware procedure for initializing a character module using either a 4 or 8 bit bus. (16k)
• Commands for Character Modules. All character module commands are charted with a brief explanation of the function of each. The timing requirements of each command are also charted for those interfaces that use software timing instead of the busy flag. (9k)
• Processor Interfacing. Hardware interfaces for two common micro controllers are shown along with the timing requirements of the interface. (29k)
• Character Module Font Table. This is a chart showing the shape and position of each character in the Standard Font Set. (26k)
• European Character Module Font Table. This is a chart showing the shape and position of each character in the European Characters Font Set. (26k)
• Alternate European Character Module Font Table. This font table is used on modules with the UMC UM3881C controller. (21k)

Graphics Modules:

• Part Number Breakdown for Graphic Modules. This explains the derivation of our part numbers and includes a list of the most popular option combinations. (9k)

Back lights:

• EL lifetime. A chart of intensity vs. time for an EL back light. (20k)
• Back light options There is also a useful selection guide chart. (20k)
• Inverters for EL & CCFL Back Lights. This specification contains drawings and electrical specifications for the EL & CCFL inverters sold by Hantronix. There is also a chart showing which inverter is recommended for each display type and a chart showing jumper options for the CCFL inverter. (42k)

General LCD issues

• Options & Selection. This is a brief discussion of the different types of  LCD’s available from Hantronix. (20k)

• Handling LCD’s and LCD modules. This is a brief discussion of the cleaning, safety and handling precautions and procedures for LCD’s (29k)
• Electro-Optical Characteristics. This charts and compares the optically related parameters of TN and STN LCD’s. There are also drawings depicting the definition of each of the measurements. (21k)
• Power Supply Sequencing. This is a discussion of the subject of power supply sequencing. This an important subject when using any dual supply module. (18k)
• Reliability and Lifetime Data. This page summarizes the reliability testing and lifetime data for our LCD modules. (18k)
• Custom Design Check List. This is a checklist to help define the mechanical specifications for a custom LCD module. (14k)