| Item |
Characteristics |
| Operating Temperature Range |
-40 to +105°C |
| Rated Voltage Range |
6.3 to 400VDC |
| Capacitance Range |
180µF to 2.2F at +25°C, 120Hz |
| Capacitance Tolerance |
±20% (M) at +25°C, 120Hz |
| Leakage Current |
I = 0.02CV (µA) or 5µA, whichever is smaller, after 5 minutes at
+25°C.
Where I = Leakage current (µA), C = Nominal capacitance (µF) and V =
Rated voltage (V) |
| Ripple Current Multipliers
Refer to Section 4 of the Mini-Glossary for explanation of Ripple
Current Multipliers. |
Ambient Temperature (°C)
| <=+45°C |
+65°C |
+85°C |
+105°C |
| 1.41 |
1.29 |
1 |
0.57 |
Frequency (Hz)
| DC Rated Voltage |
Case Diameter |
50Hz |
120Hz |
300Hz |
1kHz |
10kHz |
50kHz |
| 10-50V |
035-076 |
0.95 |
1 |
1.03 |
1.05 |
1.09 |
1.12 |
| 63-80V |
035 |
0.9 |
1 |
1.06 |
1.1 |
1.18 |
1.22 |
| 63-80V |
051-076 |
0.95 |
1 |
1.03 |
1.05 |
1.09 |
1.12 |
| 100V |
035 |
0.82 |
1 |
1.12 |
1.22 |
1.3 |
1.33 |
| 100V |
051 |
0.9 |
1 |
1.06 |
1.1 |
1.18 |
1.22 |
| 100V |
063-076 |
0.95 |
1 |
1.03 |
1.05 |
1.09 |
1.12 |
| 160-250V |
035 |
0.8 |
1 |
1.19 |
1.34 |
1.46 |
1.52 |
| 160-250V |
051-063 |
0.81 |
1 |
1.14 |
1.26 |
1.36 |
1.41 |
| 160-250V |
076 |
0.82 |
1 |
1.12 |
1.22 |
1.3 |
1.33 |
| 315-400V |
035-076 |
0.8 |
1 |
1.19 |
1.34 |
1.46 |
1.52 | |
| Life Validation Test |
The following specifications shall be satisfied when the capacitors
are restored to +25°C after subjecting them to the DC rated voltage for
2,000 hours at +105°C with the rated ripple current applied.
Capacitance change : <= 20% from initial measurement
ESR change :
<= 200% of initial specified limit Leakage current : <= initial
specified limit |
| Shelf Test |
The following specifications shall be satisfied when the capacitors
are restored to +25°C after exposing them for 500 hours at +105°C without
voltage applied. The rated voltage shall be applied to the capacitors for
a minimum of 30 minutes, at least 24 hours and not more than 48 hours
before the measurements.
Capacitance change : <= 20% from initial measurement
ESR change :
<= 200% of initial specified limit
Leakage current : <= initial
specified limit |
