| Item |
Characteristics |
| Rated Voltage Range |
6.3 to 100VDC |
160 to 250VDC |
| Operating Temperature Range |
-55 to +105°C |
-40 to +105°C |
| Capacitance Range |
120 to 33,000µF |
56 to 820µF |
| Capacitance Tolerance |
-10% to +75% (U) at +20°C, 120Hz |
±20% (M) at +20°C, 120Hz |
| Leakage Current |
I = 2(CV)1/2 (µA) after 5 minutes at +20°C. |
I = 0.02CV (µA) or 3µA, whichever is smaller, after 5 minutes at
+20°C. |
| Where I = Leakage current (µA), C = Nominal capacitance (µF)
and V = Rated voltage (V) |
| Equivalent Series Resistance (ESR) |
At +20°C, maximum ESR at 120Hz and 10kHz shall not exceed
the values given in the Ratings Tables. |
| Temperature Characteristics |
At 120Hz, -55°C / +20°C for 6.3 to 10V:
Impedance ratio
: 6 max.
Capacitance change : ±35%
ESR : <= 20 x initial
specified value
Leakage current : < initial specified value
At 120Hz, -55°C / +20°C for 16 to 100V:
Impedance ratio : 3
max.
Capacitance change : ±20%
ESR : <= 10 x initial specified
value
Leakage current : < initial specified value
At 120Hz, +105°C / +20°C for 6.3 to 100V:
Impedance ratio : 1
max.
Capacitance change : ±15%
ESR : < initial specified
value
Leakage current : <= 5 x initial specified value |
At 120Hz, -25°C / +20°C for 160 to 250V:
Impedance
ratio : 4 max.
Capacitance change : ±30%
ESR : <= 10 x initial
specified value
Leakage current : < initial specified value
At 120Hz, +105°C / +20°C for 160 to 250V:
Impedance ratio : 1
max.
Capacitance change : ±20%
ESR : < initial specified
value
Leakage current : <= 10 x initial specified value |
| Ripple Current Multipliers
Refer to Section 4 of the Mini-Glossary for explanation of Ripple
Current Multipliers. |
Ambient Temperature (°C)
| +65°C |
+85°C |
+105°C |
| 1.36 |
1 |
0.35 |
Frequency (Hz)
| DC Voltage |
60Hz |
120Hz |
300Hz |
1kHz |
20kHz |
| 6.3-16V |
0.65 |
0.75 |
0.78 |
0.8 |
1 |
| 25-50V |
0.45 |
0.6 |
0.7 |
0.75 |
1 |
| 63-100V |
0.28 |
0.5 |
0.65 |
0.75 |
1 | |
Ambient Temperature (°C)
| +65°C |
+85°C |
+105°C |
| 1.23 |
1 |
0.6 |
Frequency (Hz)
| DC Voltage |
60Hz |
120Hz |
300Hz |
1kHz |
20kHz |
| 160-200V |
0.75 |
1 |
1.2 |
1.3 |
1.5 |
| 250V |
0.83 |
1 |
1.1 |
1.2 |
1.3 | |
| Load Life |
The following specifications shall be satisfied when the
capacitors are restored to +20°C after subjecting them to the DC rated
voltage for 5,000 hours at +105°C.
Capacitance change : <= ±20% of initial measured value
ESR :
<= 300% of initial specified value
Impedance : <= 200% of initial
specified value Leakage current : <= initial specified value |
| Shelf Life |
The following specifications shall be satisfied when the
capacitors are restored to +20°C after exposing them for 1,000 hours at
+105°C without voltage applied. The rated voltage shall be applied to the
capacitors for a minimum of 30 minutes, at least 24 hours and not more
than 48 hours before the measurements.
Capacitance change : <= ±20% of initial measured value
ESR :
<= 200% of initial specified value
Impedance : <= 200% of initial
specified value
Leakage current : <= 5 x initial specified value
|
| Others |
Satisfies characteristic C of JIS C5141 |
